Flat Feet Research Today is a free monthly online journal that collates and summarizes the latest research about Flat Feet, including details on flatfoot, fallen arches, children, treatment, arthrodesis.

Biomechanical characteristics of hybrid hook-screw constructs in short-segment thoracic fixation.

Jones GA, Kayanja M, Milks R, Lieberman I

Spine Research Laboratory, Center for Spine Health, Cleveland Clinic, Cleveland, OH, USA. jonesg@ccf.org

STUDY DESIGN: Ex vivo biomechanical testing of human cadaveric thoracic spine segments. OBJECTIVE: To determine whether a hybrid construct, using a combination of pedicle screws (PSs) and lamina hooks, was equivalent to a PS construct, in a short-segment thoracic spine fixation model. SUMMARY OF BACKGROUND DATA: Comparisons have been made among PS, lamina hook, and hybrid screw-hook constructs, but these have generally been in long-segment scoliosis correction. In this study, we compared the hybrid and screw-only constructs in a short-segment thoracic fixation. METHODS: For pullout testing, matched specimens were used for PS (n = 8) and hybrid (n = 8) constructs. Construct stiffness, and the force required for construct failure, were measured. Dynamic testing was carried out on specimens in the PS (n = 7) and hybrid (n = 7) groups in compression, flexion, extension, and left and right lateral bending. Each group was tested intact, after instrumentation, and after corpectomy. RESULTS: When compared with the hybrid group, a significantly greater force was required for construct failure in the PS group, and these PS constructs were significantly stiffer. No differences were found between groups in dynamic testing. CONCLUSION: A construct employing PSs is significantly stiffer and more resistant to pullout failure than a hook-screw hybrid construct.

Published 16 January 2008 in Spine, 33(2): 173-7.
Full-text of this article is available online (may require subscription).

© 2005-2008 Flat Feet Research Today. All Rights Reserved.